Home » Topic » BLOX2 Mini Stock to Drax Upgrade process

BLOX2 Mini Stock to Drax Upgrade process

Welcome. Forums BLOX2 Forum General BLOX2 Mini Stock to Drax Upgrade process

This topic contains 1 reply, has 1 voice, and was last updated by Profile photo of jimandroidpc jimandroidpc 3 weeks, 6 days ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #782
    Profile photo of jimandroidpc
    jimandroidpc
    Participant

    Hi All, Have a BLOX2 that had a bad charging port that was running Drax and bought a Mini to replace it. I went thru the process to unlock the bootloader, loaded the TWRP on (inverted screen). and put the Drax firmware on an SDCARD. I used the firmware to then load the DRAX firmware and about 3 seconds into it loading via TWRP the phone shut down. Now it goes to the white BLU start up screen and hangs. I was able to restart it to the android recovery screen. I do not want to make my situation any worse – what should I do next?

    In recovery – I can get to “load from adb” and the cmd.exe minimal adb and fastboot detects the phone via usb. Thinking I need to replace the bootloader & the firmware –  stock/drax?

     

    Thanks for the input. j

    • This topic was modified 3 weeks, 6 days ago by Profile photo of jimandroidpc jimandroidpc.
    #784
    Profile photo of jimandroidpc
    jimandroidpc
    Participant

    i did an “adb sideload BLOX2_TWRP.img and a BLOX2_TWRP_Recovery.img and got an error message on the phone “E: Footer is wrong… Signature verification Failed…Installation aborted”

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Skip to toolbar